Chiller doors
The chiller doors are intended for the rooms with the temperatures ranging from 0 to +5 degrees Celsius. The doors can be made of stainless steel, coated steel or painted according to RAL palette. It is also possible to manufacture the mixed doors, where the doorframe is made of stainless steel, however, the door panel is made of coated steel or painted. Due to the room conditions and wall constructions, the various constructions of door panels and doorframes are used. Each door is individually designed to ensure the durability and pleasant operation for many years.
Hinged, single leaf doors
The chiller hinged doors can be produced in 3 constructional variants:
a) REBATED DOORS - standard solution
b) HALF-REBATED DOORS - door panel partially recessed in the doorframe
c) NON-REBATED DOORS - flush with the doorframe, used in narrow passages, corridors.
technical characteristics
gallery
assembly
optional equipment
movies
frames
The chiller hinged doors are intended for the rooms with the temperatures ranging from 0 to +5 degrees Celsius. Due to the room conditions and wall constructions, the various constructions of door panels and doorframes are used. Each door is individually designed to ensure the durability and pleasant operation for many years.
Door panel: Made of 0,8 mm stainless steel or 0,75 mm coated steel. The thickness of the door panel is 60 mm (rebated doors) or 80 mm (non-rebated doors).
The door panels can be made as rebated panels, where the whole thickness of the leaf adjoins the doorframe, or as half-rebated panels, where a part of the leaf goes inside the door niche and the other smaller part projects outside. The thickness of the door panel is 60 mm (rebated doors) or 80 mm (non-rebated doors). The door panels are welded in the corners and form therefore solid and hygienic constructions, made with great attention. There are stainless steel reinforcements installed inside the door panels!!!
Sealing: Regardless of the design, each door panel is equipped with a two-component seal installed in a special profile. This solution eliminates the thermal bridge of the door panels.
Hinges: Stainless steel hinges with cover or plastic hinges with steel core.
Latches: Slam lock or rod control in case of the doors with larger dimensions.
.jpg)
Chiller roon door with cost-effective one side frame
Installation space for the frames
-----------------------------------------------------------------------------------------------
Angle frame for chiller doors. Brick wall installation
-----------------------------------------------------------------------------------------------
Glazing as a finishing of the door niche + angle stainless steel profile
-----------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------
Brick wall (with holes inside). Drilled through installation
-----------------------------------------------------------------------------------------------
Sandwich panel installation with optional panel cover
 |
Pressure rod control can be executed as a safety lock |
 |
Glazing for chiller door - combined pane in the frame made of stainless steel |
 |
Stainless steel threshold |
 |
Painting according to RAL palette |
| Flat door bumper | |
 |
Stainless steel panel cover or brick wall cover. |
Rebated doors
The door panel fully covers the external side of the doorframe. This is standard and the most-cost effective solution, but requires the greatest amount of space on the side of the door installation.
technical characteristics
frames
Door panel:
- two-component rubber seal
- panel thickness - 60mm or greater at request
- slam, safety lock
- oblique stainless steel hinges with aesthetic cover
- filling with 50kg/m3 polyurethane foam under high pressure
- top quality
- surface: stainless steel, coated steel or painted steel
CH-type angle doorframes:
- angle construction ensures the best fastening
- filling with polyurethane foam
- optional flashing in case of the installation on sandwich panels
- optionally more cost-effective overlay doorframe
The doors made of stainless steel are equipped with CH-type angle doorframes, as a standard, however, the doors made of coated steel are equipped with more economical overlay doorframes. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
Standard solution: super strong angle frame, welded in the corners.
-----------------------------------------------------------------------------------------------
CLASSICAL CORNER FRAME + WALL COVER
-----------------------------------------------------------------------------------------------
CLASSICAL CORNER FRAME + WALL COVER
-----------------------------------------------------------------------------------------------
EXTENDED WIDTH FRAME
-----------------------------------------------------------------------------------------------
RIGHT SIDE BLOCK FRAME
-----------------------------------------------------------------------------------------------
OVERLAY FRAME
Half-rebated doors
The chiller half-rebated doors - door panel is partially recessed in the doorframe and partially covers the doorframe. The rigid and massive construction equipped with the hinges with visible bolts.
technical characteristics
frames
The CH-type angle doorframes are used in case of the half-rebated doors. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
Angle frame of half-frame chiller doors
Block frame from the right, round block frame
Non-rebated doors
The chiller non-rebated doors - door panel is fully recessed in the doorframe, forming a flush surface. This is a perfect solution in the corridors and passages where the doors cannot narrow the corridors.
technical characteristics
frames
Door panel:
- two-component rubber seal
- panel thickness - 80mm
- slam, safety lock
- oblique stainless steel hinges
- filling with 50kg/m3 polyurethane foam under high pressure
- top quality
- surface: stainless steel, coated steel or painted steel
CH-type doorframes
- angle construction ensures the best fastening
- filling with polyurethane foam
- optional flashing in case of the installation on sandwich panels
The CH-type angle doorframes are used in case of the non-rebated doors. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
Angle frame of inside-frame chiller doors
Block frames of inside-frame chiller doors
(Block frame left, block frame round)
Block frame left of inside frame chiller doors
Hinged, double leaf doors
The chiller hinged, double-leaf doors are used wherever the door niches must be quite broad and much more practical sliding doors cannot be used. These doors are equipped with the same seal as the sliding doors. The ergonomic lever-operated 3-point lock is used in the high double-leaf doors. The locking elements are hidden inside the doors, forming a smooth, easy-to-clean door coat.
The chiller hinged doors can be produced in 3 constructional variants:
a) REBATED DOORS - standard solution
b) HALF-REBATED DOORS - door panel partially recessed in the doorframe
c) NON-REBATED DOORS - flush with the doorframe, used in narrow passages, corridors.
technical characteristics
gallery
assembly
optional equipment
movies
frames
The chiller hinged, double-leaf doors are intended for the rooms with the temperatures ranging from 0 to +5 degrees Celsius. Due to the room conditions and wall constructions, the various constructions of door panels and doorframes are used. Each door is individually designed to the durability and pleasant operation for many years.
Door panel: Made of 0,8 mm stainless steel or 0,75 mm coated steel. The thickness of the door panel is 60 mm (rebated doors) or 80 mm (non-rebated doors).
The door panels can be made as rebated panels, where the whole thickness of the leaf adjoins the doorframe, or as half-rebated panels, where a part of the leaf goes inside the door niche and the other smaller part projects outside. The thickness of the door panel is 60 mm (rebated doors) or 80 mm (non-rebated doors). The door panels are welded in the corners and form therefore solid and hygienic constructions, made with great attention. There are stainless steel reinforcements installed inside the door panels!!!
The door can be produced in a symmetrical or non-symmetrical version, where one door leaf is smaller and the other larger.
Sealing: Regardless of the design, each door panel is equipped with a two-component seal installed in a special profile. This solution eliminates the thermal bridge of the door panels.
Hinges: Stainless steel hinges with cover or plastic hinges with steel core.
Latches: 1-point rod control or 3-point lock with locking elements hidden inside the door panels - in case of the doors higher than 250 cm.
Chiller roon door with cost-effective one side over lay frame. The difference betwen clear dimension and wall dimension is the same for single leaf and double leaf doors.
Installation space for the frames
-----------------------------------------------------------------------------------------------
Angle frame for chiller doors. Brick wall installation
-----------------------------------------------------------------------------------------------
Glazing as a finishing of the door niche + angle stainless steel profile
-----------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------
Brick wall (with holes inside). Drilled through installation
-----------------------------------------------------------------------------------------------
Sandwich panel installation with optional panel cover
|
|
Pressure rod control can be executed as a safety lock |
|
|
Glazing for chiller door - combined pane in the frame made of stainless steel |
|
|
Stainless steel threshold |
|
|
Painting according to RAL palette |
| Flat door bumper | |
|
|
Stainless steel panel or brick wall cover |
Rebated doors
The door panel fully covers the external side of the doorframe. This is standard and the most-cost effective solution, but requires the greatest amount of space on the side of the door installation.
technical characteristics
frames
Door panel:
- two-component rubber seal
- panel thickness - 60mm or greater at request
- slam, safety lock
- oblique stainless steel hinges with aesthetic cover
- filling with 50kg/m3 polyurethane foam under high pressure
- top quality
- surface: stainless steel, coated steel or painted steel
CH-type doorframes
- angle construction ensures the best fastening
- filling with polyurethane foam
- optional flashing in case of the installation on sandwich panels
- optionally more cost-effective overlay doorframe
The doors made of stainless steel are equipped with CH-type angle doorframes, as a standard, however, the doors made of coated steel are equipped with more economical overlay doorframes. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
Standard solution: super strong angle frame, welded in the corners.
-----------------------------------------------------------------------------------------------
CLASSICAL CORNER FRAME + WALL COVER
-----------------------------------------------------------------------------------------------
CLASSICAL CORNER FRAME + WALL COVER
-----------------------------------------------------------------------------------------------
EXTENDED WIDTH FRAME
-----------------------------------------------------------------------------------------------
RIGHT SIDE BLOCK FRAME
-----------------------------------------------------------------------------------------------
OVERLAY FRAME
Half-rebated doors
The chiller half-rebated doors - door panel is partially recessed in the doorframe and partially covers the doorframe. The rigid and massive construction equipped with the hinges with visible bolts.
technical characteristics
frames
The CH-type angle doorframes are used in case of the half-rebated doors. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
Angle frame of half-frame chiller doors
Block frame from the right, round block frame
Non-rebated doors
The chiller non-rebated doors - door panel is fully recessed in the doorframe, forming a flush surface. This is a perfect solution in the corridors and passages where the doors cannot narrow the corridors.
technical characteristics
frames
Door panel:
- two-component rubber seal
- panel thickness - 80mm
- slam, safety lock
- oblique stainless steel hinges
- filling with 50kg/m3 polyurethane foam under high pressure
- top quality
- surface: stainless steel, coated steel or painted steel
CH-type doorframes
- angle construction ensures the best fastening
- filling with polyurethane foam
- optional flashing in case of the installation on sandwich panels
The CH-type angle doorframes are used in case of the non-rebated doors. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
Angle frame of inside-frame chiller doors
Block frame left of inside frame chiller doors
Block frames of inside-frame chiller doors
(Block frame left, block frame round)
Sliding, single leaf doors
Specialists say:
“The floors and doors are two of the most exploited elements in the industrial plants. Their execution should be entrusted to the specialists with the extensive knowledge and experience”.
Our sliding doors are prepared to operate in the toughest conditions. They effectively work for thousands of our customers each year, earn their trust and good reputation.
technical characteristics
gallery
assembly
optional equipment
movies
frames
The chiller sliding doors are intended for the rooms with the temperatures ranging from 0 to +5 degrees Celsius. Due to the room conditions and wall constructions, the various constructions of door panels and doorframes are used. Each door is individually designed to ensure durability and pleasant work for many years.
Door panel: Made of 0,8 mm stainless steel or 0,75 mm coated steel. The thickness of the door panel is 60 mm or more at request. The door panels of envelope structure are welded in the corners and form therefore solid and hygienic constructions, made with great attention. There are stainless steel reinforcements installed inside the door panels!!!
The thickness of the large-size combined doors is 100 mm. The door panels can be produced in 3 variants:
a) standard variant - one-piece envelope structure;
b) large-size doors - two- or multi-piece envelope structure;
c) door panels made of sandwich panels in the stainless steel doorframes (this is the most-cost effective but least hygienic solution).
Probably, as the only producer of the specialist doors, we spot steel on our own (round and strip spotting). Thus, our customers can freely select doors that most correspond to their tastes.
 |
 |
 |
 |
| round mazeration | line mazeration | smooth steel | brushed steel |
Sealing: The two-component rubber seal in a special profile around the perimeter of the door. This solution eliminates the thermal bridge of the door panels. The lower part of the seal is hard and ensures a solid fit. The upper part is soft, adjoins the doorframe, ensuring a good tightness and light work of the door. The door bottom is sealed by a durable, full rubber seal. The door can be equipped with a threshold flush with the floor level or without threshold.
Sliding rail: Classical, stainless steel rail with cover or stainless steel pipe rail.
Latches (option): Classical lock, safe lock.
Door pusher: Integrated internal and external pusher, as a standard.
Assembly space for left sliding doors
-----------------------------------------------------------------------------------------------
Full brick wall installation
-----------------------------------------------------------------------------------------------
Full brick wall installation with glazing and stainless steel corner profile.
-----------------------------------------------------------------------------------------------
Brick wall installation with optionall wall cover.
-----------------------------------------------------------------------------------------------
Drill-through wall installation
-----------------------------------------------------------------------------------------------
Sandwich panel installation with optional panel cover.
|
|
glazing for chiller door |
 |
safety lock for sliding door |
 |
safety lock for sliding door |
| reverse-operation lock | |
| automatic door system for sliding door | |
| flat door bumper | |
|
|
stainless steel threshold for chiller door |
|
|
stainless steel panel or brick wall cover |
 |
widened doorframe for door niche with thermal insulation |
The doors made of stainless steel are equipped with CH-type angle doorframes, as a standard, however, the doors made of coated steel are equipped with more economical overlay doorframes. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
Standard solution: super strong angle frame, welded in the corners.
-----------------------------------------------------------------------------------------------
CLASSICAL CORNER FRAME + WALL COVER
-----------------------------------------------------------------------------------------------
CLASSICAL CORNER FRAME + WALL COVER
-----------------------------------------------------------------------------------------------
EXTENDED WIDTH FRAME
-----------------------------------------------------------------------------------------------
RIGHT SIDE BLOCK FRAME
-----------------------------------------------------------------------------------------------
OVERLAY FRAME
Classical sliding system
The classical sliding system is a standard rail. The construction, refined over time, is made entirely of stainless steel. The system cover of the door with the classical sliding rail is made of the same material as the door panel. The polyethylene rollers are specially designed to provide a quiet operation and the durability of the door.
technical characteristics
Pipe rail system
The pipe rail system consists of aesthetically brushed stainless steel pipe and two large, specifically profiled guide rollers. Due to the special profile of the rollers and the pipe, just as in the classical system, the door falls down and pushes to the doorframe, while closing.
technical characteristics
Sliding, double leaf doors
Specialists say:
“The floors and doors are two of the most exploited elements in the industrial plants. Their execution should be entrusted to the specialists with the extensive knowledge and experience”.
Our sliding doors are prepared to operate in the toughest conditions. They effectively work for thousands of our customers each year, earn their trust and good reputation.
technical characteristics
gallery
assembly
optional equipment
movies
frames
The chiller sliding doors are intended for the rooms with the temperatures ranging from 0 to +5 degrees Celsius. Due to the room conditions and wall constructions, the various constructions of door panels and doorframes are used. Each door is individually designed to ensure the durability and pleasant operation for many years.
Door panel:
Made of 0,8 mm stainless steel or 0,75 mm coated steel. The thickness of the door panel is 60 mm or more at request. The door panels of envelope structure are welded in the corners and form therefore solid and hygienic constructions, made with great attention. There are stainless steel reinforcements installed inside the door panels!!!
The thickness of the large-size combined doors is 100 mm. The door panels can be produced in 3 variants:
a) standard variant - one-piece envelope structure;
b) large-size doors - two- or multi-piece envelope structure;
c) door panels made of sandwich panels in the stainless steel doorframes (this is the most-cost effective but least hygienic solution).
Probably, as the only producer of the specialist doors, we spot steel on our own (round and strip spotting). Thus, our customers can freely select doors that most correspond to their tastes.
|
|
|
|
|
| round mazeration | line mazeration | smooth steel | brushed steel |
Sealing: The two-component rubber seal in a special profile around the perimeter of the door. This solution eliminates the thermal bridge of the door panels. The lower part of the seal is hard and ensures a solid fit. The upper part is soft, adjoins the doorframe, ensuring a good tightness and light work of the door. The door bottom is sealed by a durable, full rubber seal. The door can be equipped with a threshold flush with the floor level or without threshold (except the freezer doors which must have the threshold flush with the floor).
Sliding rail: Classical, stainless steel rail with cover or stainless steel pipe rail
Latches (option): Classical lock, safe lock, reverse-operation lock
Door pusher: Integrated internal and external pusher, as a standard
Assembly space for left sliding doors
-----------------------------------------------------------------------------------------------
Full brick wall installation
-----------------------------------------------------------------------------------------------
Full brick wall installation with glazing and stainless steel corner profile.
-----------------------------------------------------------------------------------------------
Brick wall installation with optionall wall cover.
-----------------------------------------------------------------------------------------------
Drill-through wall installation
-----------------------------------------------------------------------------------------------
Sandwich panel installation with optional panel cover.
|
|
glazing for chiller door |
|
|
safety lock for sliding door |
|
|
safety lock for sliding door |
| reverse-operation lock | |
| automatic door system for sliding door | |
| flat door bumper | |
|
|
stainless steel threshold for chiller door |
|
|
stainless steel flashing of panel or wall |
|
|
widened doorframe for door niche with thermal insulation |
The doors made of stainless steel are equipped with CH-type angle doorframes, as a standard, however, the doors made of coated steel are equipped with more economical overlay doorframes. The final selection of the doorframes depends on the installation conditions, we therefore try always to satisfy the customer’s needs. Our offer contains several types of doorframes, including block doorframes. Each doorframe is filled with polyurethane foam and equipped with special stainless steel reinforcements, which ensure the durability and rigidity of the construction. The doorframes can be optionally integrated with stainless steel thresholds (external doors or installed wherever the flooring is uneven).
Standard solution: super strong angle frame, welded in the corners.
-----------------------------------------------------------------------------------------------
CLASSICAL CORNER FRAME + WALL COVER
-----------------------------------------------------------------------------------------------
CLASSICAL CORNER FRAME + WALL COVER
-----------------------------------------------------------------------------------------------
EXTENDED WIDTH FRAME
-----------------------------------------------------------------------------------------------
RIGHT SIDE BLOCK FRAME
-----------------------------------------------------------------------------------------------
OVERLAY FRAME
Classical sliding system
The classical sliding system is a standard rail. The construction, refined over time, is made entirely of stainless steel. The system cover of the door with the classical sliding rail is made of the same material as the door panel. The polyethylene rollers are specially designed to provide a quiet operation and the durability of the door.
technical characteristics
Pipe rail system
The pipe rail system consists of aesthetically brushed stainless steel pipe and two large, specifically profiled guide rollers. Due to the special profile of the rollers and the pipe, just as in the classical system, the door falls down and pushes to the doorframe, while closing.
technical characteristics
back up
