Doors for the track
The doors for the track are designed for the tubular transport lines of pig, bovine or other half-carcases. There are several constructional solutions that allow the doors to be tightly closed. The doors for the track can be made as the industrial, chiller or freezer doors. All the doors for the track are designed individually, ideally fitted to the specific door niches.
Hinged, single leaf doors
The hinged single-leaf doors for the track are relatively rare. Due to the fact, that the width of the doors for the transport of half-carcasses should be around 135-155cm, it is recommended to use the double-leaf doors.
Nevertheless, it is possible to make the reinforced single-leaf doors for the track. This solution enables the leaves to be opened faster, thus, the full passage clearance is obtained quicker.
technical characteristics
gallery
The basic thing to produce good door that perfectly fits any door niche is good meauserment.
These sketches illustrate the measurement space necessary to define the basic parameters of the door production.
In case, the door niche is without panels around the construction, it is possible to produce additional stainless steel panels.
Hinged, double leaf doors
The hinged double-leaf doors for the track can be produced as the chiller or freezer doors. This solution is typically applied wherever it is impossible to use more practical sliding doors. The ergonomic lever-operated 3-point lock is used in the double-leaf doors for the track. The locking elements are hidden inside the doors, forming a smooth, easy-to-clean door coat.
technical characteristics
gallery
In order to ensure the delivery of the highest quality doors for the track, it is necessary to perform precise measurements of the door niche, taking into account horizontal and vertical constructions, mounting space, construction dimensions etc. The drawings show which items should be measured when placing an order for the doors for the tubular track.
Sliding, single leaf doors
The sliding doors for the track are produced individually for every door niche. Their design can vary depending on the installation place and customers’ preferences. We recommend three design solutions:
a) doors with the shared track
b) doors with the sliding rail above the track
c) sliding doors with the track-lift system
technical characteristics
gallery
frames
The proper installation of the doors depends not only on the precise production, but also on the appropriate measurements of the existing door niche and substructure. The drawings show which items should be measured in order to determine the basic production parameters.
Track lift system
The solution with the track-lift system is the most convenient form of the operation of the doors, through which the track passes. When the doors are closed, the movable parts of the track lean on the slat of the door panel. When the door is opened, the track falls down, making the way for the hooks.
technical characteristics
movies
The proper installation and operation of the doors depends on the earlier, precise measurements of the door niche, taking into account its shape and location of the construction in relation to the walls.
The drawings show the basic parameters necessary to produce well fitted doors.
Sliding rail above the track
The sliding single-leaf doors with the sliding rail above the track are a comfortable solution, which allows the installation of the not shared comprehensive track, what ensures the durability and smooth operation of the doors.
A proper amount of the mounting space above the track and possible bearing rail is required in this case.
technical characteristics
frames
The proper installation of the doors depends not only on the precise production, but also on the appropriate measurements of the existing door niche and substructure. The drawings show which items should be measured in order to determine the basic production.
, 
Shared sliding rail
The sliding single-leaf doors with the shared sliding rail are commonly used in the niches with the transport track for the half-carcasses. The sliding rail in these doors consists of two elements, between which there is a gap for the tubular track and the passage of the hooks with half-carcasses.
The disadvantage of the solution is the fact, that during the operation of the door one of the rolls is moved between the two parts of the system, which does not ensure as smooth operation of the door as in case of monolithic, not shared.
Nevertheless, it is more practical solution than the hinged double-leaf doors, where the door opening involves the operation of two door panels.
technical characteristics
The proper installation of the doors depends not only on the precise production, but also on the appropriate measurements of the existing door niche and substructure. The drawings show which items should be measured in order to determine the basic production parameters.
Sliding, double leaf doors
The sliding double-leaf doors for the track are equipped with a special recess surrounding the track. Depending on the situation, the recess can surrounds the pipe itself or the pipe together with the bearing structure.
gallery
back up
