Automatic doors

I. Standard equipment:
- Engine - power 0,55kW;
- Frequency converter LG 0,75kW;
- Driver EL11;
- Main switch with maintenance lock;
- Flashing beacon;
- Photocell in the passage clearance;
- Security strip on the edge of the door;
- Mushroom safety switches - on the both sides of the door;
- Door lock position control.

II. A series of options for the door control are available, such as:
1. Buttons in boxes mounted on the wall on the both sides of the door;
2. Cord switches mounted on the boom on the both sides of the door;
3. Radio transmitters - normally up to 4 units
4. Induction loops installed in the floor on the both sides of the door;
5. Active infrared sensors mounted on the both sides of the door.

III. How it works:
Pressing the “START” button activates the doors, they stop at the end positions.

Pressing the “START” button during driving, the doors stop, re-pressing the “START” button activates the movement in the opposite direction.

Interrupting the photocell beam or pressing the security strip on the edge of the door causes the  reverse movement of the door.

Pressing the emergency switch stops the motor and blocks its operation. Unlocking is done by turning the head of the safety switch.

The driver has the option to set the time after which the doors close automatically, this value can be set every 15 seconds.

If the photocell beam is interrupted earlier, the doors will close after 5 seconds.

If the doors are key-locked, the control system is shut off and prevents overloading of the electrical system.

The signal light is turned on automatically during the normal operation of the doors.

The control system protects also the heaters of the doorframes in case of the freezer doors.

At request, the control system can be adjusted to the customer’s individual requirements.

Installation space for one leaf automatic doors with side drive.

1) Cord switches mounted on the boom on the both sides of the door;
2) Radio transmitters - normally up to 4 units
3) Induction loops installed in the floor on the both sides of the door;
4) Active infrared sensors mounted on the both sides of the door.

5) Safety locks

6) Heated boxes (drive installed inside the freezer)

7) Stainless steel threshold (option available only in the chiller doors)

The automatic doors have the doorframes with the same parameters as their equivalents without automatic elements. In order to get acquainted with the technical characteristics of the doorframes of the automatic doors, please reference to the technical characteristics of the doorframes of the sliding freezer or chiller doors (depending on the intended use of the doors).

1) Cord switches mounted on the boom on the both sides of the door;

2) Radio transmitters - normally up to 4 units

3) Induction loops installed in the floor on the both sides of the door;

4) Active infrared sensors mounted on the both sides of the door.

5) Safety locks

6) Heated boxes (drive installed inside the freezer)

7) Stainless steel threshold (option available only in the chiller doors)

The automatic doors have the doorframes with the same parameters as their equivalents without automatic elements. In order to get acquainted with the technical characteristics of the doorframes of the automatic doors, please reference to the technical characteristics of the doorframes of the sliding freezer or chiller doors (depending on the intended use of the doors).